Dell N1100-ON Reference Manual page 1321

Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration sub-
modes
User Guidelines
The following fields are displayed.
Field
BGP table version
Status codes
Network
Next Hop
Metric
LocPrf
Path
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console(config)#show bgp ipv6 community
Description
Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented.
• s—The route is aggregated into an aggregate address
configured with the summary-only option
• *—Dell EMC Networking BGP never displays invalid
routes; so this code is always displayed (to maintain
consistency with the industry standard)
• >—Indicates that BGP has selected this path as the
best path to the destination
• —If the route is learned from an internal peer
i
IPv6 Destination prefix
The route's BGP next hop
Multi-Exit Discriminator
The local preference
The AS path
Layer 3 Routing Commands
1321