The Mute Button; Decibel Scales - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

4 Launch ATEM Software Control and it will automatically look for your control surface
using the first port on the first MIDI device that it finds. Click on the Audio tab in ATEM
Software Control to display the ATEM audio mixer. Try sliding the gain faders up and
down on your hardware control surface and verify that the audio mixer faders show a
corresponding increase and decrease in the software on your computer screen. If so,
you have successfully configured your control surface to work with the ATEM switcher.
Try sliding the gain faders up and down on your
hardware control surface and verify that the audio
mixer faders show a corresponding movement
in the software on your computer screen

The MUTE button

In the ATEM audio mixer interface, audio is always on, or present in the mix, when the ON
button is selected. When the ON button is deselected, audio is not present or is muted. To
match the software interface, you'll find the MUTE button on your audio mixer control surface
will be lit when audio is always on or present in the mix. The MUTE button will be unlit when
audio is not present or is muted.

Decibel Scales

All hardware mixers are made differently, and the scale printed on your control surface may not
match the scale in the ATEM audio mixer interface. Always refer to the ATEM audio mixer levels
for the true decibel scales.
Using Audio 176 176