Set and Label Video Input Settings
Different models of ATEM switchers allow some inputs to share connections on the rear panel.
For example on the ATEM 1 M/E Production Studio 4K model, input 1 can be switched between
HDMI and SDI.
While you're setting inputs, you might also want to change the input labels. These labels appear
on the multi view and the hardware panel. There are two labels to change: a long label used in
software, and the short label that's limited to 4 digits and used in the broadcast panel.
Set Video Inputs and Labels
Customize the Multi View
There are 8 input views in the multi view, and you can select from a range of external and
internal sources to display on these views. Simply click the menus to select what you want on
each view. If you don't have 8 cameras on your job, then you can even select media players,
color generators, or aux outputs on these views. It's extremely flexible, and you can also
change the multi view layout to suit your preference.
Customize the multi view
If you are using ATEM 6.9 or newer and an Ultra HD model ATEM switcher, you can change the
position of the program and preview windows in the multi view. Simply click on the toggle
button located between the two windows in the multi view settings.
Getting Started
21 21