Transition Slider - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

MIX
DIP
LOGO
INVERT
The transition pattern buttons let you choose which pattern to
use in a transition, such as a horizontal wipe
TIP The invert button lets you swap the direction of a wipe. For example, a diamond
wipe typically starts from the center of the screen and moves out to the edges, but if you
press the invert button, this changes the direction of the wipe so it will start from the
edges of the screen and move towards the center.
If you want to change the duration of the transition when using the auto button, go to the
Transition settings in the LCD menu and use the rotary knob next to the LCD to change
the duration.
To change the transition duration:
1 Press the menu button to display the menus.
2 Scroll through the menus to the "Transition" menu using the rotary knob.
3 Press the set button and you will see the transition menu page will be selected.
4 Now scroll down the list of items in the transition menu until you get to the rate setting.
5 Press the set button to select the setting and adjust the rotary knob to change it.
6 When you are happy with the change, press set to confirm and then press the menu
button to back out of the menus back to the main video preview screen.
RESET
RGB
Transition
Rate
RESET
ALL
Pattern
RESET
ALL
Direction
Go to the transition settings in the LCD menu to change the transition rate

Transition Slider

The transition slider works in the same way as the fader bar on other ATEM broadcast panels.
Just like a fader bar, using the slider gives you more control over a transition, compared to
pressing the auto button. This lets you create special effects. For example, you can hold a
transition between two sources by sliding half way into the transition creating a double
exposure effect. However, unlike the auto button, you don't have to complete the transition!
You can return to the original source by sliding back to the start point instead of progressing
through to opposite end of the slider.
DVE
PUSH
Transition
Wipe
1:00
Normal
DVE
SQZ
AUX
MENU
SET
Using ATEM Television Studio Pro HD 108