Changing Switcher Settings; General Settings; Setting The Switcher Video Standard - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

Hide thumbs Also See for ATEM Production Studio 4K:

Table of Contents

Available languages

However, due to space limitations the front panel of the ATEM Television Studio HD model is a

little bit different and it's interesting to see the relationship between how this control panel

works and how the software control panel works. A good way to understand this is to watch the

front panel control while controlling the switcher via the software control panel.

Because of the limited space on the front panel, both the program and preview rows have been

combined together into a single row of buttons. You can see the source selected on the

program row because it's illuminated red. You can see the source selected on the preview row

because it's selected green. These are the same colors as the software control panel, but they

are just on the same row of physical buttons.

Multiple computers can run ATEM Software Control simultaneously, which

means multiple operators can be dedicated to separate controls on your

switcher, for example media management, audio mixing and camera control

Changing Switcher Settings

Clicking on the switcher settings 'gear' icon will open the settings window where you can

change general switcher settings, Multi View, label, HyperDeck and remote settings.

These settings are divided into tabs.

The video setting is used to select the operating video standard of the ATEM switcher, and this

must be set to the same video standard as the video sources you are plugging into the ATEM

switcher. If they don't match, the inputs won't appear correctly, and will most likely remain black.

A good way to work out the video standard you should use is to check your cameras, and then

set the switcher video standard to the same format.

Control Panel

Using ATEM Software Control

Show Quick Links

Table of Contents