Controlling Hyperdecks With Atem Software - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

If you want to cue to a still frame of video or manually trigger video playback on your
HyperDeck, you can also deselect the 'auto roll' feature.

Controlling HyperDecks with ATEM software

To control the HyperDecks connected to your switcher, click the 'media players' tab in the
software control panel, and choose the 'HyperDecks' palette.
Here you can choose between each of the HyperDecks connected to your system by clicking
one of the four buttons along the top of the panel. These are named according to the labels
entered in ATEM settings. Available HyperDecks are shown with white text, while the
HyperDeck you are currently controlling is shown in orange.
Choose from up to four HyperDecks by clicking their
selection buttons in the HyperDecks palette.
In addition to the text color, each HyperDeck's selection button also has a tally indicator.
Green Outline
Indicates a HyperDeck that is currently switched to the preview output.
Red Outline
Indicates a HyperDeck that is currently switched to the program output, meaning it is
currently live to air.
You may also see one of the following status indicators above the selection buttons for
your HyperDecks.
Ready
HyperDeck is set to remote and a disk is inserted. It is ready for playback and recording
if space is available.
Record
HyperDeck is currently recording.
HyperDeck Control 74 74