Dve Key; Adjusting The X/Y Position Of A Pattern - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

Soft
Invert Pattern
Flying Key

Adjusting the x/y position of a pattern

Some of the patterns may have their center point repositioned. To position a pattern, navigate
to the pattern selection page of the keyer you are setting up. Use the joystick to move the
pattern vertically and horizontally. To re-center the pattern, press the pattern select button of
the current pattern in the menu. This will reset the position and symmetry of the pattern.

DVE Key

DVEs (digital video effects) are used to create picture-in-picture boxes with borders. Most
models have 1 channel of 2D DVE that allows scaling, rotation, 3D borders and offers a
drop shadow.
Combining a background, DVE fill and DVE key/cut
Background
A full screen image.
Fill
Another full screen that has been scaled, rotated or has added borders and will be
overlaid on top of the background.
Key/Cut
In the case of a DVE key, the key/cut signal is generated by the switcher's internal DVE
processor.
DVE Key Settings
Changes the softness of the edge of the key signal.
This button inverts which the region filled with the fill source. For
example, fill a region outside of a circle by positioning the circle wipe as
desired and then selecting inverse.
Enables/disables DVE effects
Operating your ATEM Switcher 144 144