Component Video Program Output; Down Converted Sdi Program Output; Auxiliary Sdi Outputs; Usb 3.0 Output - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

Component Video Program Output

ATEM 1 M/E and 2 M/E Production Switchers feature three BNC component connectors that
switch between SD and HD from the main program output. Component lets you to connect to
equipment such as encoders and video projectors, and provides greater compatibility with
older analog equipment.

Down Converted SDI Program Output

This SDI output always feeds the program video as standard definition on ATEM 1 M/E and
2 M/E production switchers. It is perfect for connecting to older SD equipment or even
generating simultaneous SD and HD streams. ATEM 2 M/E Broadcast Studio 4K and
ATEM 2 M/E Production Studio 4K models have a dedicated HD SDI program output.
This output always feeds the program video as standard definition NTSC or PAL composite
video on ATEM 1 M/E and 2 M/E Production Switchers. This composite output lets you connect
to old video equipment.

Auxiliary SDI Outputs

All ATEM switchers, excluding ATEM Television Studio, have auxiliary SDI connections that
output the same video format in use. The number of auxiliary outputs vary between models:
‚ ATEM Television Studio HD has 1 auxiliary output
‚ ATEM Television Studio Pro HD has 1 auxiliary output
‚ ATEM Production Studio 4K has 1 auxiliary output
‚ ATEM 1 M/E Production Studio 4K has 3 auxiliary outputs
‚ ATEM 2 M/E Broadcast Studio 4K has 6 auxiliary outputs
‚ ATEM 2 M/E Production Studio 4K has 6 auxiliary outputs
Auxiliary outputs can use any internal and external video sources. For example, program feeds
if you need more program outputs, or clean feeds without down stream keying, or even specific
video inputs. Aux outputs are perfect for driving video screens on stage, or feeds where you
can independently control what the viewers see. Aux outputs switch cleanly and can be used
as cut only switchers independent of the main program outputs. The audio on these outputs is
embedded SDI program audio.

USB 3.0 Output

The ATEM 1 M/E and ATEM 2 M/E Production Switchers have a USB 3.0 output that can be used
to capture video direct to a Windows PC for real time mastering or waveform monitoring.
You can also stream over the internet using encoding software. Blackmagic Media Express
software is included for recording from this output, as well as Blackmagic UltraScope for
waveform monitoring. The USB 3.0 output uses the Aux 1 output so you can customize your
output feed. The audio on this output is embedded program audio.
USB 2.0 Output
ATEM Television Studio has a USB 2.0 output which can be used to capture an H.264
compressed master file of your program. ATEM switchers include Media Express software for
recording from this output. The audio on this output is embedded program audio.
Preview SDI Output
This output shows the source selected on the preview bus on the switcher, as well as preview
transitions. This output is perfect when you want to use a full resolution preview monitor.
The audio on this output is embedded SDI program audio.
Connecting Video Outputs 32 32