Switcher Settings; Set The Switcher Video Standard - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

Manually setting the IP address for your Mac OS computer.

Switcher Settings

Now you have the software control working, you'll need to apply your switcher settings.
Click on the gear icon on the lower left side of the interface to open the settings window
of the ATEM Software Control.

Set the switcher video standard

You can set the video standard to suit the region in which you are broadcasting, such as
2160p29.97, 1080i59.94, 720p59.94 or NTSC if you are broadcasting in NTSC based countries
including America and Japan, or you can set your video standard to formats such as
2160p25, 1080i50, 720p50 or PAL if you are broadcasting in Europe or Asia.
Set Video Standard
If you're working with standard definition video equipment in the widescreen anamorphic 16:9
video format, select 525i59.94 16:9 for anamorphic NTSC or 625i50 16:9 for anamorphic PAL.
Make sure all your cameras and any connected HDMI devices are also set to the same video
standard, or they won't be visible on the switcher video inputs. This is generally quite easy, as
countries have standards for their HD and Ultra HD broadcasts and all equipment sold in these
countries matches this standard or at the very least can be switched between standards. When
all video standards are matched, you should see connected devices show up in the multi view
video input windows.
Getting Started 19 19