Source Select Buttons For Keyers And Macros - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

KEY 1 CUT
The KEY 1 CUT button for the upstream keyer is used to cut the upstream keyer on or
off air and indicates whether it is currently on or off air. The button is illuminated if the
upstream keyer is currently on air.
DSK 1 TIE and DSK 2 TIE
In a similar fashion to the KEY 1 TIE button, the DSK 1 and 2 TIE buttons will enable
downstream keyers 1 and 2 on the preview output, along with the next transition
effects, and tie them to the main transition control so that the downstream keyers can
be taken to air with the next transition.
When the downstream keyer is tied to the main transition, the transition will happen at
the rate specified in the transition rate setting.
DSK 1 CUT and DSK 2 CUT
The DSK CUT buttons for downstream keyers 1 and 2 are used to cut the downstream
keyers on or off air and indicates whether they are currently on or off air. The buttons
are illuminated if the DSKs are currently on air.
DSK 1 AUTO and DSK 2 AUTO
The DSK AUTO buttons will mix the downstream keyers on or off air at the rate
specified in the downstream keyer's rate setting.

Source Select Buttons for Keyers and Macros

The source select row of numbered buttons above the program and preview rows are used to
set sources for the upstream keyer and each of the downstream keyers. You can also use these
buttons to record and run macros.
KEY 1 KEY 1
CUT FILL
1 2
The source select buttons let you choose sources for keyers, such as the fill and cut source
Source Buttons
1
2
3
4
5
6
7
8
9
10
11
12
DSK 1 DSK 1 DSK 2 DSK 2
CUT FILL CUT FILL
3 5 6
Source
HDMI Input 1
HDMI input 2
HDMI input 3
HDMI input 4
SDI input 5
SDI input 6
SDI input 7
SDI input 8
Media Player 1
Media Player 1 Key
Media Player 2
Media Player 2 Key
DVE DVE
DIP BORD
CUT FILL
7 8 9 10
Using ATEM Television Studio Pro HD
MACRO
11 12
115