Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual page 160

14 If you want your macro to instantly run as soon as you select it, click on the 'recall and
run' button. By enabling this feature you can load and play your macros with only one
click of a button.
Congratulations! If your macro was successful, you should see your ATEM switcher perform a
mix from color bars to color 1 using a 3 second transition, pause for 2 seconds, then perform
another 3 second mix transition to black, all by clicking one button in the macros window! Your
ATEM switcher will also display an orange border around your software control panel to indicate
a macro is playing.
If your macro doesn't perform the way you expect it to, simply rerecord the macro you just
created following the previous steps.
To start recording a macro, select a macro slot, then click on the
create macro button. Type in your notes and click 'record'.
While recording, the create macro button will change to a 'record' button.
When you have completed your switcher actions, click on the 'record'
button to stop recording.
ATEM Software Control displays a red border to indicate when you are recording
a macro. The 'add pause' button located at the top of the red border lets you
enter durations for pauses between switcher actions.
Using Macros 160 160