Set Audio Preferences - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

Set Audio Preferences

The 'audio' tab lets you select which XLR output to use for audio monitoring. This feature is
enabled on models that have XLR connectors. On some ATEM switcher models you can mute
incoming talkback on inputs 5 to 8 to prevent a potential feedback loop in the
talkback channels.
Audio Settings
These particular models also feature mix minus settings on SDI outputs 5 to 8 which lets you
mute the corresponding input from its program return output. For more information, refer to the
section titled, 'Changing Switcher Settings/Setting the Audio Output Behaviour'.
The audio follow video settings let you set the switcher to use a default short crossfade when
switching sources with AFV enabled, or to use a duration set by your transition rate setting. For
more information refer to the 'Using ATEM Software Control/changing switcher settings' section.
Mix minus settings in the audio tab let you mute the corresponding input
from its program return output on some ATEM switcher models
Getting Started 20 20