Capture - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

Timecode List, Thumbnail
Media List
Project name, video Clip Bins
format and frame rate

Capture

Capturing video is easy and all you need to do is connect a video source, wait for Blackmagic
Media Express to detect your input and press the 'capture' button.
For ATEM 1 M/E or 2 M/E production switchers, connect the switcher to your computer via a
USB 3.0 cable.
For ATEM Television Studio, connect the switcher to your computer via a USB 2.0 cable.
1 Start by connecting your video source to an input of your Blackmagic Design hardware.
Launch Blackmagic Desktop Video Utility and check that the 'set video input' setting is
the same as your video source, e.g., SDI, HDMI, Component, etc.
2 Open Media Express and click the red 'log and capture' tab.
3 Your source video will appear in the preview pane. Enter a description into the
'description' field.
4 Click the '+' button next to the description to add it to the automatic 'name' field. Click
the '+' button next to any of the other fields that you wish to add to the name field.
‚ To increment the value in each of these fields, click the corresponding clapper
board icon.
Alternatively, type directly into any field to customize its name and number.
‚ The text in the automatic name field will be applied to the clip(s) about to
be captured.
‚ To log the clip as a favorite, click the star icon next to the name field.
‚ For a clip name confirmation prompt to appear before every capture, click the '!' icon
next to the name field.
and Favorites view Search Field
Mark In Grab Logging
/Mark Out Still Information
Frame
VTR / deck timecode
Capture Transport Audio
options
Controls channel
enable
/disable
Using Blackmagic Media Express
Video Preview
Audio Remote
Meters indicator
180 180