Gamut error tolerance settings for color and brightness
Audio error tolerance settings
Audio Metering Display
Audio Metering Display shows you the audio levels in the embedded audio of the SDI video
signal. The 2 channels of embedded audio from your ATEM Production Switcher are de-
embedded and then displayed in either dBFS or VU format. The VU button switches between
dBFS and VU audio metering standards.
dBFS is essentially a meter of the overall digital audio signal and is common on modern digital
equipment.
The VU meter shows average signal levels, is easy to use and very common on older
equipment. VU is calibrated to the SMPTE recommendation of a 1 kHz tone test signal set
to -20 dBFS.
Using Blackmagic UltraScope
197
197