Setting The Multi View Video Standard - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

Hide thumbs Also See for ATEM Production Studio 4K:

Table of Contents

Available languages

2 M/E Broadcast

To set the video standard, select the video standard from the menu, and then select the set

button. Any time the video standard is changed, it will erase any frames you have loaded into

the media pool.

Setting the Multi View Video Standard

Use this dropdown menu to select the video standard on ATEM switchers that can support

Ultra HD multi view output, such as ATEM 2 M/E Broadcast Studio 4K.

The multi view output on ATEM 2 M/E Broadcast Studio 4K supports Ultra HD up to 2160p29.97

so on this model you can monitor at higher quality when you connect an Ultra HD monitor or

television. If you set the ATEM to Ultra HD 2160p50 or 2160p59.94 video, the multi view will be

automatically displayed using 2160p25 or 2160p29.97 respectively so you can use a wider

range of Ultra HD televisions. However if you want to use a standard HD television, then you

can also set the multi view outputs to be down converted to HD for even greater monitor

compatibility.

For example if your ATEM is selected to run at 2160p59.94 then the multi view will output at

2160p29.97 when the multi view setting is selected to Ultra HD, or you can choose to output

1080i59.94, 1080p29.97 or 1080p59.94 when the multi view output is selected to regular HD.

Set Multi View video standard

For all other switcher models the multi view output is always HD even when running in standard

definition so you can see all your sources in higher resolution. When switching Ultra HD video

at 59.94 or 50 frames per second, the multi view will display HD video at 29.97 or 25 frames

per second respectively.

Production Studio

Television Studio Pro HD and

ATEM Television Studio HD

Using ATEM Software Control

Show Quick Links

Table of Contents