Selecting Other Sources - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

If you press cut, button 4 will now illuminate red as it's on air. Input 4 will also be switched to the
program outputs. If you select auto, then the currently selected transition will be triggered and
for the transition duration, you will see both buttons 1 and 4 illuminated red, because during the
transition both sources are on air.
Thats all there is to it! If you would like to change the transition type, then you can do this in the
LCD menus. To change the transition type, use the following steps.
1
2
3
4
5
6
ON ON ON
DSK 1
FTB
MIX
AFV AFV AFV
MP 1 MP 2
6 7 8
CUT AUTO
While in the menu, you can press the auto button to see the different types of transitions
available to you. Each one of the transition types listed in the LCD menus can also be selected
on the software control panel or a hardware control panel if you have one.
As well as the 8 main input buttons, there is also some other sources on the front panel and
they are labeled MP 1 and MP 2. These are media player 1 and media player 2. If you have
graphics in your switcher, such as a graphic or title slide, then you can select the media players
as sources and then cut or transition to them.

Selecting Other Sources

You can select other sources in the switcher that are not on the front panel from the
LCD menus.
To select an alternative program source, use the following steps.
1
2
3
ON ON ON ON
AFV AFV AFV AFV
1 2 3 4
Press the 'auto' button to perform an auto transition
Press the menu button to display the menus.
Scroll with the knob through the menus to the "Transition" menu.
Press the set button and you will see the transition menu page will be selected.
Now scroll down the list of items in the transition menu until you get to the
transition item.
Press the set button and scroll through the list of options. Let's select the
DVE transition.
Press set to select it. You can press the menu button to back out of the menus back to
the main video preview screen.
Transition
Mix
Dip
Wipe
DVE
Use the LCD menu to select the transition type and you can
also set the transition duration in the transition settings.
Press the menu button to display the menus.
Scroll with the knob through the menus to the "Program" menu.
Press the set button and you will see the program menu page will be selected.
ON ON ON ON
DSK 1
FTB
MIX
AFV AFV AFV AFV
MP 1 MP 2
5 6 7 8
CUT AUTO
AUX
MENU
SET
Camera 4
AUX
MENU
SET
+2.3dB
Using ATEM Television Studio HD 100 100