Dve Transition Parameters; Dve Key Parameters - Blackmagicdesign ATEM Production Studio 4K Installation And Operation Manual

DVE Transition Settings

DVE transition parameters

DVE Rate
Normal
Reverse
FlipFlop

DVE key parameters

Enable key
PreMult
The duration of the DVE transition in seconds and frames. Rotate the
DVE rate knob to adjust the DVE transition rate. The new rate is
immediately displayed in the transition rate window in the transition
control block.
The normal direction applies the DVE effect on program, revealing the
preview channel.
Reverse changes the direction so that the DVE effect is applied on the
preview channel. In the case of reverse, program is covered by a DVE
effect with the preview video.
When FlipFlop mode is toggled on, the transition changes between
normal and reverse every time the transition is executed.
Enables/disables the DVE key. The DVE key is enabled when the button
is illuminated.
Selects the DVE key as a pre-multiplied key.
Operating your ATEM Switcher 131 131