Remote Network Monitoring (Rmon) Commands; Rmon Alarm - Cisco Sx350 Cli Manual

Remote Network Monitoring (RMON)
Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
1

51.1 rmon alarm

To configure alarm conditions, use the rmon alarm Global Configuration
modecommand. To remove an alarm, use the no form of this command.
Syntax
index mib-object-id interval rising-threshold falling-threshold
rmon alarm
rising-event falling-event [type {absolute | delta}] [startup {rising | rising-falling |
falling}] [owner name]
no rmon alarm index
Parameters
•
index—Specifies the alarm index. (Range: 1–65535)
•
mib-object-id—Specifies the object identifier of the variable to be sampled.
(Valid OID)
•
interval—Specifies the interval in seconds during which the data is
sampled and compared with rising and falling thresholds. (Range: 1–
2147483647)
•
rising-threshold—Specifies the rising threshold value. (Range: 0–
2147483647)
•
falling-threshold—Specifies the falling threshold value. (Range: 0–
2147483647)
•
rising-event—Specifies the index of the event triggered when a rising
threshold is crossed. (Range: 0–65535)
•
falling-event—Specifies the index of the event triggered when a falling
threshold is crossed. (Range: 0–65535)
51
1011