Show Zone - Cisco MDS 9000 series Command Reference Manual

show zone

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show zone
To display zone information, use the show zone command.
Syntax Description
active
ess
member
name
statistics
status
vsan vsan-id
lun lun-id
lun-zoning
read-only-zoning
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.3(4)
2.1(1a)
Usage Guidelines None.
Examples The following example displays configured zone information.
switch# show zone
zone name Zone3 vsan 1
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:9c:48:e5
zone name Zone2 vsan 2
Cisco MDS 9000 Family Command Reference
22-364
show zone
[active [vsan vsan-id] |
ess [vsan vsan-id] |
member {fcalias alias-name | fcid fcid-id [lun lun-id] | pwwn wwn [lun lun-id]} [active | vsan
vsan-id] |
name string [active] [vsan vsan-id] |
statistics [lun-zoning [vsan vsan-id] | read-only-zoning [vsan vsan-id] | vsan vsan-id] |
status [vsan vsan-range]
vsan [vsan vsan-id]]
Displays zones which are part of active zone set.
Displays ESS information.
Displays all zones in which the given member is part of.
Displays members of a specified zone.
Displays zone server statistics.
Displays zone server current status.
Displays zones belonging to the specified VSAN ID. The range is 1 to 4093.
Specifies a LUN ID.
Displays LUN zoning related statistics
Displays read-only zoning related statistics
Modification
This command was introduced.
Modified the show zone status display.
Chapter 22 Show Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x