Power-Supply Module Leds; Alarm Leds; Sd Flash Memory Card Led - Cisco IE 4010 Hardware Installation Manual

Power-Supply Module LEDs

Power-Supply Module LEDs
The switch power-supply module LEDs are labeled PSU1 and PSU2 (on the switch) and PSU OK (on the
power-supply module). They show whether power-supply modules 1 and 2 are receiving power.
Table 5: Power Supply Module LEDs
Color
Off
Green
Red
Blinking red

Alarm LEDs

Table 6: Alarm LEDs
Color
1-4 Input Alarms
Green
Red
Blinking red
Output Alarm
Green
Red

SD Flash Memory Card LED

Table 7: SD Flash Card LED
Color
Fast blinking amber
Slow blinking amber
Green
Blinking green
Cisco IE 4010 Switch Hardware Installation Guide
10
System Status
Power-supply module (1 or 2) is not installed.
Valid input is present, and the output is within the operating range.
Valid input is present, and the output is outside the operating range or is
not present.
Power-supply module (1 or 2) is installed but valid input is not present.
System Status
Alarm not present
Minor alarm present
Major alarm present
Alarm not present
Alarm condition present
System Status
Unsupported SD flash memory card is detected.
SD flash memory card is not present.
SD flash memory card is functioning.
SD flash memory card transfer in progress.
Product Overview