Rmon; Rmon Alarm - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Administration manual (283 pages)
Table of Contents
Advertisement
Administration
RMON
RMON
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Number of
Traps Since Log
Last Viewed
Log
System UP Time
Trap
Related Commands
Command
show logging
Smart switch supports Remote Monitoring (RMON) for collecting data about
network traffic. A device that supports gathering and reporting the RMON data is
referred to as an RMON probe or RMON Agent. An RMON probe provides RMON
data to an RMON Manager for analysis and presentation to the User. This section
describes the RMON commands.
rmon alarm
Use this command to configure alarm conditions. Use the no form of the command
to remove an alarm.
rmon alarm index variable interval rthreshold fthreshold revent fevent [type type] [startup
direction] [owner name]
no rmon alarm index
Syntax Descriptions
Parameter
index
The number of new traps since the command was last
executed.
The log number.
System up time.
The text of the trap message.
Description
Displays logging configuration information.
Description
The alarm index. The range is 1–300.
2
155
Advertisement
Table of Contents
