Show Sntp - Edge-Core ECS2100-10T Reference Manual

Default Setting
None
Command Mode
Global Configuration
Command Usage
This command specifies time servers from which the switch will poll for time
updates when set to SNTP client mode. The client will poll the time servers in the
order specified until a response is received. It issues time synchronization requests
based on the interval set via the
Example
Console(config)#sntp server 10.1.0.19
Console#
Related Commands
sntp client (137)
sntp poll (138)

show sntp (139)

show sntp
This command displays the current time and configuration settings for the SNTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for sending time
synchronization requests, and the current SNTP mode (i.e., unicast).
Example
Console#show sntp
Current Time
Poll Interval
Current Mode
SNTP Status
SNTP Server
Current Server : 137.92.140.80
Console#
Chapter 4
sntp poll
: Nov 5 18:51:22 2015
: 16 seconds
: Unicast
: Enabled
: 137.92.140.80
: 137.92.140.90
: 137.92.140.99
– 139 –
| System Management Commands
command.
Time