Configure And Delete The Standard Acl Name - Edge-Core ES3628EA User Manual

18.5.4 Configure and delete the standard ACL name

Click "ACL name configuration" to open up the sub-sections, next click "ACL name
configuration" to enter the configuration page. The way to configure the "ACL name
configuration" is the same with "Numeric ACL Configuration". The only difference users
should change the ACL number to the ACL name. This should be entered in ACL name
not ACL number. CLI command: 1.2.2.6
There are seven sub-sections of this:
ACL name
ACL type - standard and extended
Rule - permit and deny
Source address type - Specified IP address or any randomly allocated IP address
Source IP address
Reverse network mask
Operation type -Add or Remove
To add a numeric ACL, specify the ACL name and related value, select the "add" in the
Operation type and then click "Apply".
727