W
I
EB
NTERFACE
To configure static members by the VLAN index:
Click VLAN, Static.
1.
Select a VLAN from the scroll-down list.
2.
Select Edit Member by VLAN from the Action list.
3.
Set the Interface type to display as Port or Trunk.
4.
Modify the settings for any interface as required.
5.
Click Apply.
6.
Figure 71: Configuring Static Members by VLAN Index
To configure static members by interface:
Click VLAN, Static.
1.
Select Edit Member by Interface from the Action list.
2.
Select a port or trunk configure.
3.
Modify the settings for any interface as required.
4.
Click Apply.
5.
– 207 –
| VLAN Configuration
C
6
HAPTER
IEEE 802.1Q VLANs