Install a DVD Drive
6.
Gently push the DVD drive forward and out of the front of the chassis.
7.
Standing in front of the chassis, grasp the DVD drive with both hands, and
continue to pull the DVD drive from the chassis until it clears the front of the
server.
Place the DVD drive on an antistatic mat.
8.
9.
Replace the DVD drive or continue to access other parts for service.
See
"Install a DVD Drive" on page
Related Information
"Install a DVD Drive" on page 142
■
Install a DVD Drive
Authorized service personnel can perform this procedure. The server must be
completely powered down before performing this procedure. See
Categories" on page 45
1.
Remove the defective DVD drive.
142
SPARC T7-1 Server Service Manual • May 2017
142.
for more information about cold-service procedures.
"Component Service