Operation
107
6
The DACS Camera System
6.1
DACS Test File
The below image is of a file included with your software installation. The file is named DACS Test.cdl,
which can be used to perform and verify the set up procedure detailed in the following sections. The test
file is installed on your computer with the Vision software and located in C:\Vision Express 9\Vision jobs.
(or C:\Vision Expert 9\Vision jobs, or C:\Vision Pro 9\Vision jobs, depending on your version of the
Vision software).
Please open the DACS Test.cdl file in your Vision software and print it at 100% scale. The file is
designed to be printed on a standard letter (8.5" x 11") sized paper. The printed image can then be
adhered to a solid piece of material, such as acrylic, in order to perform the set up procedure.
© 2015 Vision Engraving and Routing Systems