Part I Introduction; Important Note - Vision VR48 4 Series User Manual

6 Vision VR48 Series 4 Router User Manual
1 Introduction
About This Manual
Thank you for your purchase of the Vision VR48 Large Format Engraving and Routing System. To fully
take advantage of your system, be sure to read this guide completely before using your system. This
manual is designed to provide you with information about your VR48 machine. Beginning with ing the
machine and continuing through installation, operation and maintenance, this manual does not attempt
to teach the user how to become an expert in engraving, computer usage, or engraving software
usage. Some previous knowledge of engraving terms and the engraving process is certainly
beneficial. For information on the Vision Engraving Software, see the Vision Engraving
Software manual. For more information on your individual computer system, see your computer's
user manual or contact your computer distributor.
To begin, locate the White/Blue Dongle or Orange Dongle or USB
Stick included with your machine in the Accessories Box

Important Note:

The Vision software is available in two versions; one with a dongle, and one
that is "dongle-less" and is loaded on to a USB Memory stick.
If your machine was delivered with, or you currently have the white/blue or
orange software dongle, DO NOT LOSE IT!
The Vision software will NOT run without the dongle plugged into the
computer.
© 2015 Vision Engraving and Routing Systems