Table of Contents
Advertisement
318
Vision VR48 Series 4 Router User Manual
Before moving forward, we need to define where are parts will be located on the engraving table and the
number of items we will be engraving. The following diagram shows an array of parts placed in a
template/fixture and their locations/spacing. The X spacing of the parts is 5.00 inches and the Y spacing
is 4.00 inches. Cancel and close the Multiples window at this time.
The array of parts is 5 columns and 2 rows for a total of 10 parts per job. The table is represented as
the outside outline in the below picture.
© 2015 Vision Engraving and Routing Systems
Advertisement
Table of Contents
