Vision VR48 4 Series User Manual page 324

324 Vision VR48 Series 4 Router User Manual
We want to create serial numbers beginning with 00015 and ending with 00044. First, replace the serial
number in the Start field with the first serial number we want to produce. In this example, type in 00015.
Then, select only the number portion of the variable text in the in the Start field as shown and click on
Set as Base.
Since we only want to produce 1 of each serial number, set the Repeat field to 1. (If we wanted to
create more than one item with the same serial number, we could enter the number of items we want to
produce of each serial number in the Repeat field. Entering 3, would produce 3 items of the same serial
number). We also want the serial number to increment by 1 number. Enter 1 in the Increment field. Note
that in the Base section, the Base is set to 00015, which is our first serial number. The Number (not
character) selection is chosen and the All selection (default) is chosen. Once these changes have been
made, select OK.
© 2015 Vision Engraving and Routing Systems