Vision VR48 4 Series User Manual page 264

264 Vision VR48 Series 4 Router User Manual
The top toolbar will change the the Fit Text to Path toolbar. Click on Add Text on the right side of this
toolbar.
Enter the text as shown. The same font (Helv1, sized 0.20 inches high) was used.
To change the position of this text, click on the Top Start Position icon on the top toolbar, then click on
Apply on the right side of this toolbar. Then enter the Text to Path Distance of 0.150 inches as show,
and click on the Apply button again. Click on Close to exit this tool.
© 2015 Vision Engraving and Routing Systems