Oscillating Knife Operation - Vision VR48 4 Series User Manual

66 Vision VR48 Series 4 Router User Manual
4.4.1

Oscillating Knife Operation

Knife Blade Installation
WARNING: KNIFE BLADES ARE VERY SHARP AND CAN CAUSE INJURY. HANDLE WITH
CARE. PROTECTIVE GLOVES ARE RECOMMENDED WHEN INSTALLING OR REMOVING
KNIFE BLADES.
To install a Knife Blade, loosen the Allen Screw at the base of the Knife Assembly and insert the Blade
Shaft into the Holder, making sure the Flat on the Blade Shaft is facing the Allen Screw. Tighten the
Allen Screw firmly.
© 2015 Vision Engraving and Routing Systems