Vision VR48 4 Series User Manual page 314

314 Vision VR48 Series 4 Router User Manual
When the mouse button is released, a frame text area is created.
In order to make the text always start at the left side of the frame, the Left Justify option was selected on
the top toolbar.
The frame is them modified to produce the same font and size as the text above (or any other size and
font desired for the variable text). Set the font and height in the top toolbar, then drag the BLUE frame
outline down until there are two visible RED frames inside the blue frame. These two red frames consist
of an inner frame showing the area where the text will be constrained and an outer frame showing the
allowable text height and width. Note that the outer red frame (and blue frame) do not allow text to exceed
the plate frame. If the serial numbers are such that there are too many characters to fit withing the inner
red frame, the text will be automatically compressed by default. For more information regarding text
compression options, search for Text Frame Properties in the Help section available on the top toolbar.
© 2015 Vision Engraving and Routing Systems