Vision VR48 4 Series User Manual page 171

Example Jobs 171
In order to engrave by color, from the toolbar menu select Engrave Engraving Defaults (Note that the
Cut Order Warning screen refers to the "Plotting Defaults", but the menu item is "Engraving Defaults"),
then make sure Engrave by Color checkbox is selected, then Apply and Close.
In order to send the engrave file to the engraver, select the Engrave icon from the left toolbar, at which
time the Filter by Color window will appear. Select the color to send to the engraver in the Filter Layer
drop down box. In this example, all text and graphics are Black, so the color Black (P1) was selected
from the drop down menu in the Filter by Color window.
© 2015 Vision Engraving and Routing Systems