252
Vision VR48 Series 4 Router User Manual
Repeat this for the rest of the letters, adding one at a time as selected objects and moving them until all
of the letters overlap as shown. Note that when overlapping letter like the letter "S", make sure that the
side of the letter completely overlaps the next character.
With all letters selected, select the Weld Tools icon from the left toolbar and click on Basic Weld.
The letters will then be welded together to form a single object with a continuous outline. this is our
"logo".
Move the logo to the upper right section of the plate.
© 2015 Vision Engraving and Routing Systems