Vision VR48 4 Series User Manual page 128

128 Vision VR48 Series 4 Router User Manual
Once the design has been finished, the Fiducials need to be changed to Pen 99 in the Vision software.
This is mandatory, as the DACS software looks for objects drawn in Pen 99 and identifies those objects
as Fiducials. If you have drawn the Fiducials in the Vision software (as 0.25 inch diameter circles),
follow the steps below to change the color/pen of the Fiducials to Pen 99.
Step1 -. Select View from the top menu bar, and make sure Show Fill is not checked.
Step 2 - Select all Fiducials and move the mouse pointer over a color swatch on the bottom color swatch
list to a color that you do not normally use, such as Orange (shown below).
© 2015 Vision Engraving and Routing Systems