Vacuum Pump Maintenance - Vision VR48 4 Series User Manual

340 Vision VR48 Series 4 Router User Manual
10.4

Vacuum Pump Maintenance

Vacuum Pump Air Filter
The vacuum pump filter will need to be serviced periodically. The frequency of service will depend on
machine usage and materials being processed. Check the filter by removing the filter cap and filter on a
weekly basis. The filter can be cleaned by blowing compressed air from the inside of the filter outwards.
Care must be taken to not apply too much air pressure or filter damage may occur.
When replacing the filter, place the filter support under the end of the filter as shown to assist in
properly aligning the filter. Replace the cap and secure with the filter cap clips.
© 2015 Vision Engraving and Routing Systems