Vision VR48 4 Series User Manual page 216

216 Vision VR48 Series 4 Router User Manual
Select Engrave, then click on Tool Library to add a new tool for this application.
In the Tool Library, select a tool that is closest in description to the one you want to add. Give it a new
name (1/8' End Mill 1" Cut was used in this example). Enter the cutting Height of the tool (1.00 inch in
this example). Click on Add, which stores the new tool in the tool library, then click on OK.
Select the Tool Path Tools icon from the left toolbar, then click on Male. Choose the new Tool you just
created and adjust the Depth to 0.875 (which is slightly more than the actual material thickness - which
measured 0.863 inches). Click on the icon to set the number of passes.
© 2015 Vision Engraving and Routing Systems