Profile Cutting Dimensional Letter - Metals; Example Job 7 - Dimensional Letter In Metals - Vision VR48 4 Series User Manual

7.2.3

Profile Cutting Dimensional Letter - Metals

In this example, a dimensional letter will be cut out of 11 gauge aluminum plate. The techniques used in
this application are multi-pass metal cutting, holding down material, creating tool paths and using the
Surface Sensing Block.
7.2.3.1

Example Job 7 - Dimensional Letter in Metals

Begin by setting the plate size to a 9.0 x 9.0 inch area.
© 2015 Vision Engraving and Routing Systems
Example Jobs 205