Vision VR48 4 Series User Manual page 280

280 Vision VR48 Series 4 Router User Manual
Create a Male tool path for this rectangle the same way we created the tool paths for the other cut outs.
Use the 0.015" Engraver as the tool and make the tool path color cyan (or any other unused color).
You can then turn off the black and red colors using the color swatches on the right side of the Vision 9
window and send all the objects in cyan to the machine. Use the settings for Engraver's Plastic
(Cutting). All the cut outs will be processed. When the cutting is finished, the panel is then complete.
© 2015 Vision Engraving and Routing Systems