Control Panels; Example Job 10 - Plastic Control Panel - Vision VR48 4 Series User Manual

250 Vision VR48 Series 4 Router User Manual
7.3.2

Control Panels

In this example, an industrial control panel will be created using 1/16th inch engraver's plastic. Vision
Pro 9 software is required for this application in order to create a dial on the panel. The techniques
covered in this application include: Logo creation, welding objects, object duplication, creating a basic
array, dimensional placement of objects, and the creation of a dial.
7.3.2.1

Example Job 10 - Plastic Control Panel

The control panel created in this example is constructed with a piece of engravers plastic which is
slightly larger than our plate size. The final panel size will be 13.75 inches x 11.75 inches. Begin by
setting the plate size to 14 x 12 inches.
To create the logo, enter the text as shown, using HANDLED as the font. The font height is 2.0 inches
and it has a slant of 16 degrees.
© 2015 Vision Engraving and Routing Systems