Vision VR48 4 Series User Manual page 244

244 Vision VR48 Series 4 Router User Manual
Remove the End Mill cutter and install the Braille Drill cutter. Set the cut depth to 0.042" (42 clicks).
To send a job which drills the holes for the braille rasters, we first turn on all colors in our Vision 9 plate
(again, using the CTRL + Left click on the color swatches), and click on the Horizontal Mirror icon on
the top toolbar to "un-mirror" the plate.
Select Engrave from the Top Menu, then click on ADA Plot.
NOTE: When sending jobs to the machine using the ADA Plot function, TWO jobs will be sent to the
machine. The first job drills the holes and the second places the rasters into the drilled holes.
Select Cut Braille Text.
© 2015 Vision Engraving and Routing Systems