Table of Contents
Advertisement
Maintenance
337
Z Axis Bearings and Rails
Note - To move the Z Axis (router head) up or down, the machine must be powered on. Use the
Z up or down controls on the pendant to move the router head.
Use a paper towel to wipe down the Z Axis stainless steel rails. Using the included grease gun and
grease fitting adapter, supply grease to the grease fittings for the bearings every 60 days. Only 1/2 to 1
pump of the grease gun is required.
© 2015 Vision Engraving and Routing Systems
Advertisement
Table of Contents
