Vision VR48 4 Series User Manual page 218

218 Vision VR48 Series 4 Router User Manual
Select the Device as your machine. We will be sending only Selected items in our drawing to the
machine, so put a check mack in the box to the left of Selected, then click on Apply and then Close.
Select Engrave, then Tool Options from the top menu bar.
Select Sign Foam (Cutting) from the Material list. Set the Proximity on/off value to 0. We will be using
the Set Surface function in this example, so the Proximity sensor will not be used. Click on OK when
finished.
© 2015 Vision Engraving and Routing Systems