Level 3 Job Examples; Ada Signs; Example Job 9 - Acrylic Ada Signage - Vision VR48 4 Series User Manual

7.3

Level 3 Job Examples

These last 2 example jobs are more complex, require combinations of cutting and engraving, as well as
utilize features only available in the Vision 9 Expert or Pro software versions. A working knowledge of
the software and machine setup are required to produce quality results.
7.3.1

ADA Signs

In this example, an ADA sign will be created using 1/8th inch reverse engravable acrylic (clear with a
white background), plastic applique material, and the braille insertion tool. The techniques used with this
application are: importing decorative designs, using the braille inserter, creating braille text, reverse
engraving, profile cutting acrylic and applique material, creating tool paths and color filling.
7.3.1.1

Example Job 9 - Acrylic ADA Signage

Note: 4 cutting tools are used in this particular application, although 3 tools can be used. The tools
are: 1/8th inch End Mill for profile cutting the acrylic, 0.030 Flex Cutter for engraving filled areas,
0.015 Flex Cutter for profile cutting the applique material, and the Braille Drill Tool for drilling the
holes for the braille beads..
Begin by creating a 13 inch x 9 inch plate in Vision Expert 9. Vision Expert or Pro is required to create
braille text as shown in this example job. Select the Shape Tools icon from the left toolbar, the select the
Rectangle Tool..
Create a 12 inch by 8 inch rectangle and center it in the middle of the plate. This will be used to cut the
perimeter of the sign.
© 2015 Vision Engraving and Routing Systems
Example Jobs 221