Vision VR48 4 Series User Manual page 196

196 Vision VR48 Series 4 Router User Manual
Before we can modify this text and weld it together, we must convert it to graphics. Select the text (or
exit text mode by clicking in an empty area of the plate, if you are still in text mode), then select Arrange
from the top menu bar and click on Text To Graphics.
Each letter can now be selected individually. Select the first letter and move it to the right using the
arrow keys on your computer's keyboard. Make sure there is an overlap with the next letter (as pointed
to below). Add the second letter to the selected objects by holding the Shift Key on your computer's
keyboard and clicking on the second letter (with the first letter still selected). Using the Shift/Click adds
or subtracts objects as selected objects. With the first two letters selected, move them both to the right
until the second and third letters overlap.
Overlap first and second letters. Overlap first/second with third letter.
Continue adding letters and moving them until all letters overlap.
© 2015 Vision Engraving and Routing Systems