Vision VR48 4 Series User Manual page 310

310 Vision VR48 Series 4 Router User Manual
Set the Tool and Depth setting to the cutter you are going to use and the depth you wish to engrave the
item. Choose the color for the tool path. In this example, a 0.015 Engraver was selected as the tool and
the depth was set to 0.010 inches. Then select OK.
Make sure that Show Line Style is selected in the View command.
The image now represents what the engraved signature would look like on your material.
© 2015 Vision Engraving and Routing Systems