Table of Contents
Advertisement
Example Jobs
169
The screen should appear as below after pasting the names into the plate.
Lastly, before we send the file to the engraver, we will separate the graphics into two different colors,
one for engraving and one for cutting. This is necessary so that two files can be sent to the engraver
independently and a cutting tool change can be performed after engraving. To change the Plate Object
frames to another color (red in this example), select the Plate Object frame, then click on the Red color
icon on the bottom toolbar of the Vision software. It is also a good idea to verify the color of the other
objects on the screen. If all other objects are to be Black, then select everything except for the Plate
Object frame and click on the Black color icon at the bottom of the screen. Many times, when importing
graphics, the color is unknown, so making sure the graphics are the correct color is good practice.
© 2015 Vision Engraving and Routing Systems
Advertisement
Table of Contents
