Table of Contents
Advertisement
274
Vision VR48 Series 4 Router User Manual
We now need to add a fill to the Vision logo. Select the Vision logo and select the Tool Path Tools icon
from the left toolbar, then click on the Fill icon.
Set the tool as the .015 Engraver, the Depth to 0.015 inches, the Color to Black (we will engrave this
area at the same time we engrave the other black objects), the Gap to 0, use S-Sweep for the pattern
and set a 25% overlap, then click on the
icon to set the number of passes.
© 2015 Vision Engraving and Routing Systems
Advertisement
Table of Contents
