Vision VR48 4 Series User Manual page 270

270 Vision VR48 Series 4 Router User Manual
The Font Detective window will appear. Select Engraving Fonts as the Group, choose Helv1 font from
the Font drop down list, then click on the Select button to the right of the Font drop down list.
Now, set the Start number as 100, set the increment to negative 10 (- 10.000). Set the Label font size to
0.700 inches and the Label offset to 0.300 inches. Click on OK to set these parameters.
© 2015 Vision Engraving and Routing Systems