Network Connection - Vision VR48 4 Series User Manual

36 Vision VR48 Series 4 Router User Manual
3.3

Network Connection

Connecting via Standard Network Cable to Network
Once the VR48 is connected to your network, turn the machine on. The main power switch is located
on the left side of the machine. Make sure all 4 emergency stops are not pressed. The safety key
switch for the VR48 is located on the front left of the machine. Turn the main power switch to On, then
turn the safety key switch to On. Once the machine has initialized, plug the supplied Vision USB drive
(or Orange USB Dongle) into an available USB port on your computer.
NOTE - This installation is performed on a Windows 7 PC. For Windows XP, Windows 8, Windows 8.1
or Windows 10, the screens are slightly different.
The computer will recognize the USB drive
Select Open folder to view files.
and the following screen will appear.
Select Continue without scanning.
© 2015 Vision Engraving and Routing Systems